SMART CONNECT KNX e-charge II

Via the SMART CONNECT KNX e-charge II, charging points, solar inverters and solar storages can be integrated into the KNX system. · Integration of five charging points per device · Charging points of different manufacturers can be used at the same time · State values of charging points: Consumption values (current, power, energy, last charge and duration), states (connected, charging, charging completed, charging point state), start/stop and interrupt charging process, temperature value and temperature warning, information such as vehicle ID (EVCCID) and RFID tag · Integration of five solar inverters per device · Solar inverters of different manufacturers can be used at the same time · State values of solar inverters: Yield value (power, energy), temperature · Integration of one solar storage per device · State values of the solar storage: Current power and energy values (charging/discharging), state of charge (SoC) · Static load management (SLM) integrated · Dynamic load management (DLM) integrated · Grid-supporting control · Integrated unbalanced load management · Prioritisation of charging points (switchable at runtime) · Various charging strategies (Immediate, ECO) · Boost (fast charging) · Phase switching (1- or 3-phase charging) · Fault messages from charging points, inverters, solar storage and device · Integrated RS485 adapter and IP switch (2-gang) · KNX Secure · Completely configurable in ETS · Extensions via firmware updates The following manufacturers are already supported: Supported charging points: · ABB ·  ABL ·  Alfen ·  Ebee ·  Heidelberg ·  KEBA ·  Mennekes ·  Schneider Electric ·  Schrack Technik ·  Stöhr Supported inverters: · Fronius ·  KOSTAL ·  SMA ·  SolarEdge A detailed list can be found here: https://www.ise.de/en/products/smart-connect-series/e-charge-2#c2959