GLASS FRAME for 9025 TRANSPONDER READER - BLACK - LINE SERIES - RGB

The 9025 series devices dedicated to access control management are KNX devices and use RFID – MIFARE® technology and can be configured with ETS® to communicate with the KNX Data Secure protocol. The range includes: TR00C02KNX: Transponder reader with 3 control buttons + BLE beacon + knx secure TH00C02KNX: Transponder holder with 3 control buttons + BLE beacon + knx secure OUTRC02KNX: External transponder reader + BLE beacon + knx secure The products are intended to be installed with the glass covers which can be customized on request. The devices integrate an antenna with BEACON BLE (Bluetooth Low Energy) function. Data format compatible with iBeacon® and Eddystone®. The device allows you to set the transmission frequency and signal strength. BLE technology allows the sending of messages to mobile devices. These devices must have an app that allows them to receive information from BLE beacons. The upper part of the glass is backlit (to illuminate the room number or a logo - both customizations on request); in the lower part there are freely configurable backlit capacitive buttons. For TR00C02KNX and OUTRC02KNX: 1 button (typically with bell function) and 2 LEDs for displaying the MUR and DND states. For TH00C02KNX: 1 button (typically with CAMERA LIGHTS function) and 2 buttons for setting MUR and DND. The transponder is read by placing it in front of the reader, at a maximum distance of 20 mm; in the case of the transponder pocket, the card is inserted into a compartment from the top of the device. The color of the reader RGB LED bar indicates that the card has been recognized and shows different (configurable) colors for status or anomalies reporting such as: • Card recognized (welcome): default color Green • Incorrect system code: color default Orange • Unrecognized ID card: default color Red • Wrong Card Date (validity expired): default color Yellow • Wrong time of day (Entry forbidden time): default color Magenta • Wrong day of the week (Entry prohibited day): default color Blue-Cyan • Card access denied: default color White • Card with exhausted counter: default color Blue-Magenta The reader also integrates a buzzer (which can be activated with the ETS parameter) for anomalies signaling. The 9025 KNX range is mounted in 2 or 3 modules box (with the exception of the code OUTRC02KNX available only 2 modules) and is compliant with main standards (British, German, Italian). External mounting of the OUTRC02KNX device is possible only in combination with the OUTMC01ACC accessory