SINGLE GLASS LINE 6 CH. FOR HC06A01KNX-3 BLACK

The environmental sensors MC06A01KNX and HC06A01KNX are devices of the 9025 series, they are wall-mounted and are finished with a white or black glass. In the MC06A01KNX device there are 3 sensors available: temperature, humidity and CO2 , this measure is detected by using an integrated probe specially designed to detect CO2 data directly and not through calculations based on other sensors. The HC06A01KNX device integrates humidity and temperature sensors. Both devices are also equipped with a 2-way connector on the rear side that can be configured as a digital or analogue input; in fact it is possible to connect an additional NTC probe to the device (eelectron code TS01A01ACC or TS01B01ACC - not included) to obtain a second temperature measurement. The device includes 2 double-stage thermostats for controlling two distinct areas, both with an integrated PI controller for driving heating and cooling equipment, valves, 6-way valves, 2 and 4-pipe fan coils, etc ..; The humidity sensor manages the reading of the relative humidity in the environment and allows threshold control with hysteresis of humidification and dehumidification equipments. Both devices embed 6 capacitive keys for the management of on / off commands, dimmers, shutters and blinds, execution and learning of scenarios, object sequences, local thermostat controls, etc. The device includes a RGB LED on the front side for displaying status (temperature, humidity and CO2 ) or other quantities available on the KNX bus.